Qazi Forex Tips logoQazi Forex Tips
SMC Course · Phase 3 · Lesson 3.4

Mitigation Block

The mitigation block is a close relative of the breaker, with one difference: no liquidity sweep comes before it. It shows the first weakness of a trend and often gives a very clean continuation entry. In this lesson you will learn to spot mitigation blocks and tell them apart from breakers.

Mitigation block in 3D: Gold chart with a higher low, a break of the swing high and a retest of the failed order block

What mitigation means

To mitigate means to reduce a loss. When a large player's position is proven wrong, they wait for price to come back near their entry so they can exit with the smallest loss. Where they exit, their orders push price again. That zone is the mitigation block.

Definition

Bullish mitigation block: a high formed (with a zone of green candles before it), then price fell but did not break the previous low, making a higher low. Price then rallied and broke the high. That green-candle zone, which failed as a bearish order block, is now support. Bearish mitigation block: the opposite: a lower high forms, the low breaks, and the red-candle zone is now resistance.

Bullish mitigation block: a failed bearish order block after a higher low, without a liquidity sweep
Bullish mitigation block: after a higher low the high broke, with no liquidity sweep.

Breaker or mitigation? One question decides

Just check where the last low formed before the high broke:

QuestionAnswerZone
Did the last low sweep the previous low (lower low)?YesBreaker block
Did the last low stay above the previous low (higher low)?YesMitigation block

For the bearish side, apply the same test to the high: a higher high means a bearish breaker, a lower high means a bearish mitigation block.

RememberIn a breaker the large player takes liquidity first, so a breaker is usually the stronger reversal. In a mitigation block the market is strong enough not to return to the low at all, so it often signals continuation or a slower reversal.

Bearish mitigation block

Bearish mitigation block: a failed bullish order block after a lower high, without a liquidity sweep
Bearish mitigation block: after a lower high the low broke, and the red-candle zone is now resistance.

This is very common in downtrends: price makes a lower high, breaks the low, then comes back and drops from the same red zone.

Why mitigation blocks work

  1. Traders who bought the green candles before the high went into loss when price fell.
  2. After the higher low, as price rises again, these traders (and large players) want to exit at break-even or add to the position.
  3. After the high breaks, their orders in that zone push price up again on the return.

Trading a mitigation block step by step

  1. Bias: check the higher timeframe direction. A mitigation block in the bias direction is best.
  2. Higher low and break: after the higher low, the high must break with a strong body.
  3. Zone: the last green candle or candles before the broken high, from high to low.
  4. Entry: on the retest at the top of the zone or its 50%, or on M1 confirmation.
  5. Stop loss: below the zone or below the higher low.
  6. Target: the next buy-side liquidity.

Gold example

Gold H1 is in an uptrend. Price made a high at 4,138 (green-candle zone before it 4,130 to 4,138), then fell to a higher low at 4,124. The previous low at 4,118 did not break.

  • Price then broke 4,138 with a strong candle and ran to 4,146.
  • Bullish mitigation block: 4,130 to 4,138, 50% at 4,134.
  • On the return price reached 4,133. Entry 4,134, stop 4,127, risk $7.
  • Target: last week's high at 4,152, $18, about 1:2.5.

Real Gold chart examples

Gold H1 on 29 and 30 Sep 2026 (data: Dukascopy, bid price; Pakistan time):

A bullish mitigation block on a real H1 chart.
A bullish mitigation block on a real H1 chart.
  • The low at 10:00 on 29 Sep was 4,121.9. The green 19:00 candle made a high at 4,175.0.
  • At 22:00 price came down to 4,142.0: the previous low did not break, a higher low. No sweep, so this is a mitigation block, not a breaker.
  • The 00:00 candle on 30 Sep closed at 4,177.0: the 4,175.0 high broke.
  • At 01:00 price came back to 4,171.3, into the zone of the 19:00 candle, and turned there. It reached 4,202.0 by that afternoon.

Second example: bearish mitigation (12 Nov)

Gold M15 on 12 Nov 2026 (data: Dukascopy, bid price; Pakistan time). The first example was a bullish mitigation block; this is a bearish mitigation block:

A bearish mitigation block on a real M15 chart.
A bearish mitigation block on a real M15 chart.
  • The 06:15 high was 4,000.3.
  • After the red 07:30 candle (3,973.7 to 3,988.0) price rose, but only to 3,984.9 at 08:45: it did not take the previous high. Buyers were weak; no sweep.
  • At 10:15 a candle closed at 3,971.2, below the 07:30 candle's low: a bullish OB broken without a sweep = a mitigation block.
  • At 10:30 price came back up into the zone to 3,978.9 (where trapped buyers get out) and then fell; 3,852.3 later that day.

The difference between a breaker and a mitigation block is one question: was there a sweep before the break? Here there was not.

Common mistakes

Common mistakeTreating mitigation and breaker as the same. The sweep is the difference, and the sweep tells you how strong the reversal is.
Common mistakeTrusting a weak break. A wick touching the high is not a break; a body close is needed.
Common mistakeTrading a very large zone. If the group of green candles is big, use the 50% or the top candle, or the stop will be huge.

Summary

  • A mitigation block is a failed order block with no liquidity sweep before it.
  • Bullish order: high, higher low, break of the high, retest of the zone.
  • Remember: lower low means breaker, higher low means mitigation.
  • A mitigation block in the bias direction gives a clean continuation entry.

Spot it on the chart: practice

This is a real Gold chart (Dukascopy data, Pakistan time). Study it and pick an answer. After you answer, the fully marked chart and the explanation appear.

Question chart
Question chart

On 22 Sep price did not take the previous high at 4,383.2 (a lower high formed), then broke the low at 10:00. Which is the bearish mitigation block?

Test yourself: Lesson 3.4 quiz

7 questions. Pick one answer for each and you will see at once whether it is right and why. Your score and grade appear at the end. You need 70% to pass.

0 correct · 0 / 7

  1. Question 1What does to mitigate mean?

  2. Question 2In a bullish mitigation block, what is the last low before the high breaks?

  3. Question 3Which usually gives the stronger reversal, a breaker or a mitigation block?

  4. Question 4Where is a bearish mitigation block most common?

  5. Question 5Is a wick touching the high a break for a mitigation block?

  6. Question 6If the green-candle zone is very large, what do you do?

  7. Question 7Gold H1: high 4,138 (zone 4,130 to 4,138), higher low 4,124 (the previous low 4,118 held), then 4,138 breaks. What zone is it?

Lesson checklist

Tick each point once you understand it. Your ticks are saved in this browser.

Assignment

  1. Find 5 bullish and 5 bearish mitigation blocks on Gold H1.
  2. On the same charts find 3 breakers and write the difference (sweep or no sweep).
  3. See which worked better: breaker or mitigation.
  4. Write a full trade plan for one example.
  5. Post your chart in the group.

Post your assignment screenshots with your reasons in our free Facebook group, where your charts will be checked.

Join the free group
Dr. Qazi Abdul Basit

Who wrote this lesson

, Ph.D

Ph.D in Business Administration and a forex and Gold trader since 2013. Founder of Qazi Forex Tips, which teaches traders in Pakistan and India price action, risk management and trading psychology in their own language: 65 student batches so far, free courses on YouTube, and MT5 tools for traders (QFT Replay Simulator, QFT Trade Assistant).

  • 2013 trading since
  • 75K+ Facebook group members
  • 65 student batches
  • 15K+ YouTube subscribers

How this lesson was made: the content follows Dr. Qazi's teaching method and years of trading. Real charts are built from Dukascopy Gold (XAUUSD) data, and backtest results are shown as they came out, even when negative. We do not sell signals, manage accounts or take money from any broker. Last updated: 19 November 2026.

Full profile · YouTube · Facebook group · Student feedback

Questions

What is a mitigation block?

A failed order block that broke without a liquidity sweep (after a higher low or lower high) and now works in reverse.

Which is better, mitigation or breaker?

A breaker is usually the stronger reversal because a sweep comes first; a mitigation block suits continuation in the bias direction.

What does mitigation mean?

Reducing a loss: a large player exits or protects a wrong position at a smaller loss.

What is a bearish mitigation block?

A bullish order block that breaks without a sweep, after the move up failed even to take the previous high. When price returns, trapped buyers exit and the reaction is down.

What does it mean when an order block is mitigated?

Price has come back and touched the zone. An unmitigated (first-touch) zone is considered stronger; each new touch weakens it.

Read more

Education only, not financial advice. Trading forex, Gold and CFDs carries a high risk of loss. SMC concepts describe tendencies, not guarantees. Lesson 20 of 38.